Cisco Cisco Aironet 1130 AG Access Point Guida All'Installazione
14
78-xxxxx-0x
•
A system name
•
The case-sensitive wireless service set identifier (SSID) for your radio
network
network
•
A Simple Network Management Protocol (SNMP) community name and
the SNMP file attribute (if SNMP is in use)
the SNMP file attribute (if SNMP is in use)
If you are not connected to a DHCP server, you can assign an IP address to
the access point using the CLI. In this situation, obtain a unique IP address
for your access point, a default gateway, and subnet mask from your network
system administrator.
the access point using the CLI. In this situation, obtain a unique IP address
for your access point, a default gateway, and subnet mask from your network
system administrator.
Mounting the Access Point
Cisco Aironet 3500, 1260, 1140, 1130, and 1040 series access points can be
mounted in several configurations, including on a suspended ceiling, on a
hard ceiling or wall, on an elecrtical or network box, and above a suspended
ceiling. Click this URL to browse to complete access point mounting
instructions:
mounted in several configurations, including on a suspended ceiling, on a
hard ceiling or wall, on an elecrtical or network box, and above a suspended
ceiling. Click this URL to browse to complete access point mounting
instructions: