Cisco Cisco 521 Wireless Express Access Point
5
Release Notes for Cisco 521 Wireless Express Standalone Access Point for Cisco IOS Release 12.4(10b)JX
OL-15365-01
Software Release Information
Step 2
The Cisco.com Registration page appears.
Step 3
Complete the information on the page.
Step 4
Click Submit.
Additional information about registering is available on cisco.com at the following URL:
GUI Changes
GUI support for the following features have been removed:
•
SNMP community string
•
Advanced voice features such as voice metrics and GPR
•
Station roles except root access point
•
Universal workgroup bridge
•
Limited scanning support
GUI changes include the following:
•
MFP statistics removed from the Security Summary page
•
Intrusion Detection page removed
•
Service Summary page corrected; no longer empty
•
SNMP related links removed from the Service Summary page
•
Rate-limiting related configuration items removed from QoS page
•
HTTP and TFTP Upgrade page removed; pages available on CCA
•
Hostname, system, and username/password pages removed; pages are available on CCA
•
Extra space removed on Express Setup page
•
Client selection checkbox removed on Association page
•
Changed color of Apply and Cancel buttons on SSID Manager page
Converting an Autonomous AP521 Using the CCA
When an autonomous AP521 access point is converted to controller-mode operation using the CCA, the
access point properties screen continues to indicate that the access point is an AIR-AP521G-A-K9 after
the conversion. This is in agreement with the product label on the access point. However, the CCA
displays a small triangle icon next to the converted access point to indicate that the access point is now
operating as a controller-mode access point.
access point properties screen continues to indicate that the access point is an AIR-AP521G-A-K9 after
the conversion. This is in agreement with the product label on the access point. However, the CCA
displays a small triangle icon next to the converted access point to indicate that the access point is now
operating as a controller-mode access point.
Note
The CCA conversion process is one-way. Once the conversion takes place, you cannot restore the access
point to autonmous operation.
point to autonmous operation.