Cisco Cisco 5508 Wireless Controller Scheda Tecnica
Wireless CleanAir Deployment Guide
Smart Business Architecture
Step 6:
Select Apply to Controllers….
Step 7:
Select ALL Controllers and click OK.
Step 8:
Navigate to Configure > Controller Template Launch Pad.
Step 9:
Navigate to 802.11b/g/n > CleanAir.
Step 10:
From the drop-down list, select Add Template.
Step 11:
Create a template name (for example, CleanAir-802.11b/g/n) and provide
the following information:
1. Check the CleanAir Enable check box.
2. Check the Report Interferers Enable check box.
3. Add Continuous Transmitter, DECT-Like Phone, Jammer, Microwave Oven
2. Check the Report Interferers Enable check box.
3. Add Continuous Transmitter, DECT-Like Phone, Jammer, Microwave Oven
and Video Camera to Interferers Selected for Reporting.
4. Check the Interferers For Security Alarm Enable check box.
5. Add Continuous Transmitter, DECT-Like Phone, Jammer, Microwave Oven
5. Add Continuous Transmitter, DECT-Like Phone, Jammer, Microwave Oven
and Video Camera to Interferers Selected for Security Alarms.
6. Click Save.
Figure 41.
802.11b/g/n CleanAir Parameters
Step 12:
Select Apply to Controllers….
Step 13:
Select ALL Controllers and click OK.
Enable Event Driven Radio Resource Management
Step 1:
Step 1:
Navigate to Configure > Controller Template Launch Pad.
Step 2:
From the left menu, navigate to 802.11a/n > 802.11a/n-RRM > DCA.
Step 3:
Select Add Template.
Step 4:
Create a template name as follows:
1. Check the Event Driven RRM Enable check box.
2. Change the Sensitivity Threshold to Medium.
3. Click Save.
2. Change the Sensitivity Threshold to Medium.
3. Click Save.
Figure 42.
802.11a/n Event Driven Enable
Step 5:
Select Apply to Controllers….
Step 6:
Leave Apply to controllers selected directly and check All Controllers
and click OK.
Step 7:
Navigate to Configure > Controller Template Launch Pad.
Step 8:
From the left menu, navigate to 802.11b/g/n > 802.11b/g/n-RRM > DCA.
22