Cisco Cisco Packet Data Gateway (PDG) Guida All'Installazione
Chassis Installation
▀ Reducing the Weight of the Chassis Prior to Installation
▄ ASR 5500 Installation Guide
50
Remove the Upper Front Fan Tray
Step 1
At the front of the chassis, remove the cover panel from the top of the chassis. Firmly grasp the side edges of the panel
and pull up and away to unsnap the panel. Put the panel safely aside.
and pull up and away to unsnap the panel. Put the panel safely aside.
1
Cover panel
2
Access panel
3
Front fan tray
Step 2
Use a #1 Phillips screwdriver to loosen the screws and remove the access panel from the upper-front of the chassis.
Place it safely aside.
Place it safely aside.
Step 3
Loosen the two screws on the fan tray.
Step 4
Grasp the center pull on the front of the fan tray and pull. The fan tray should unseat from the midplane connector and
slide out of the chassis.
slide out of the chassis.
Step 5
Place the fan tray safely aside.