Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Context Configuration Mode Commands
▀ ggsn-service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ggsn-service
Creates/deletes a Gateway GPRS Support Node (GGSN) service and enters the GGSN service configuration mode
within the current context.
within the current context.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes a preciously configured GGSN service.
Specifies the name of the GGSN service to create/configure.
must be from 1 to 63 alpha and/or numeric characters and is case sensitive.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Services are configured within a context and enable certain functionality. This command creates and allows
the configuration of services enabling the system to function as a GGSN in a GPRS or UMTS network. This
command is also used to remove previously configured GGSN services.
A maximum of 256 services (regardless of type) can be configured per system.
the configuration of services enabling the system to function as a GGSN in a GPRS or UMTS network. This
command is also used to remove previously configured GGSN services.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a large
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Example
The following command creates a GGSN service name ggsn1:
The following command creates a GGSN service name ggsn1: