Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Context Configuration Mode Commands
▀ interface
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
interface
Creates/deletes an interface or specifies an existing interface. By identifying an interface, the mode changes to configure
this interface in the current context.
this interface in the current context.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Indicates the interface specified is to be removed.
Specifies the name of the interface to configure. If
does not refer to an existing interface, the new
interface is created if resources allow.
must be from 1 to 79 alpha and/or numeric characters.
Default: Enabled
Creates an Ethernet broadcast (IP) interface and enters the Ethernet configuration mode.
Creates an Ethernet broadcast (IP) interface and enters the Ethernet configuration mode.
Important:
Refer to the Ethernet interface Configuration Mode Command chapter for more information.
Default: Disabled
Creates an internal IP address that can be reached by any interface configured in the current context. The
interface must be configured for loopback when configuring Interchassis Session Recovery. A total of 256
loopback interfaces can be configured.
Creates an internal IP address that can be reached by any interface configured in the current context. The
interface must be configured for loopback when configuring Interchassis Session Recovery. A total of 256
loopback interfaces can be configured.
Important:
Refer to the Loopback Interface Configuration Mode Command chapter for more information.
Creates a permanent virtual connection (PVC) in the current context and enters the PVC configuration mode.
Currently, this type of interface is only used with an optical (ATM) line card.
Currently, this type of interface is only used with an optical (ATM) line card.
Important:
Refer to the PVC interface Configuration Mode Command chapter for more information.