Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Commands (A-C)
clear crypto ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
clear crypto
The clear crypto command clears crypto associations or crypto statistics.
Product
PDSN, HA, GGSN, PDG/TTG, PDIF, SCM
Privilege
Security Administrator, Administrator, Operator
Syntax
When no keywords are specified, this command clears all of the ISAKMP security associations for the
current context.
current context.
: Clears the ISAKMP SAs for the specified crypto map.
is the name of an
existing crytpo map.
: Deletes the ISAKMP SAs for the specified peer.
must be entered in standard
IPv4 notation.
: Resets the counters for the specified crypto map.
is the name of an existing crypto map.
specifies that only the transmit SA counters are reset.
specifies
that only the receive SA counters are reset. If neither
or
are specified, both transmit and receive SA
counters are reset.
: Tears down a Security Association (SA) for the specified crypto map.
is the
name of an existing crytpo map.
: Clears the SAs for all tunnels who have the peer at the specified IP address.
must be entered in standard IPv4 notation.
Caution:
Modification(s) to an existing crypto map and/or ISAKMP policy configuration will not take effect
until the related security association has been cleared.
ikev2: Clears global IKEv2 statistics for the current context.
ipsec-3gpp-cscf: Clears global CSCF IPSec statistics for the current context.
ipsec-3gpp-cscf: Clears global CSCF IPSec statistics for the current context.
Clears statistics for the specified service-ip address.
Clears statistics for the specified service name.
Usage
Clear SAs and apply changes to the crypto map or clear the crypto statistics for this context.