Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Commands (D-S)
debug ip ospf ism ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
debug ip ospf ism
This command enables OSPF Interface State Machine (ISM) troubleshooting, based on ISM information type. If no
keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to the logging
system.
keywords are specified all ISM information types are enabled. If logging is enabled, results are sent to the logging
system.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator, Operator
Syntax
Disable debugging the specified ISM information. If no keywords are specified, all information is disabled.
Enable debugging ISM event information.
Enable debugging ISM status information.
Enable debugging ISM timer information.
Usage
Use this command to output ISM debug information.
Example
To enable all ISM debug information, enter the following command;
To enable all ISM debug information, enter the following command;
To disable all ISM debug information, enter the following command;