Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Show Commands (A-C)
▀ show active-charging content-filtering category statistics
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
show active-charging content-filtering category statistics
This command displays category-based content filtering statistics.
Product
CF
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
: Displays category-based content filtering statistics, optionally for a specific or all
rulebase.
must be the name of an existing rulebase, and must be an alpha and/or numeric string of 1
through 63 characters in length.
: Displays category-based content filtering statistics for each configured rulebase in the active charging
service separately.
Specifies that the output should provide as much information as possible. If this option is not specified then
the output is the standard level, which is the concise mode.
the output is the standard level, which is the concise mode.
Specifies that output of this command is to be piped (sent) to the command specified. A command to send the
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
Use this command to view category-based content filtering statistics for a specific rulebase, or cumulative
statistics for all rulebases in an active charging service.
statistics for all rulebases in an active charging service.
Example
The following command displays category-based content filtering statistics for the rulebase named
The following command displays category-based content filtering statistics for the rulebase named
.
The following command displays cumulative category-based content filtering statistics for all rulebases in verbose
mode:
mode: