Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Show Commands (D-G)
show egtp-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show egtp-service
Displays configuration information for evolved GPRS Tunneling Protocol (eGTP) services on this system.
Product
MME, P-GW, S-GW
Privilege
Inspector
Syntax
Displays configuration information for all eGTP services configured on this system.
Displays configuration information for a specific eGTP service configured on this system.
must be an existing eGTP service, and be from 1 to 63 alpha and/or numeric characters in
length.
Indicates the output of the command is to be piped (sent) to the command specified.
A command to send output to must be specified.
For details on the usage of the
A command to send output to must be specified.
For details on the usage of the
and
commands, refer to the Regulating a Command‘s Output
section of Chapter 1 of the Command Line Interface Reference Guide.
Usage
Use this command to view configuration information for eGTP services on this system.
Example
The following command displays service statistics for the eGTP service named
The following command displays service statistics for the eGTP service named
: