Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Show Commands (H-L)
show iups-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show iups-service
This command displays information for Iu-PS services in the current context.
Product
SGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Show information for all IuPS services.
must be a string of 1 to 63 alphanumeric characters that identifies a specific existing IuPS
service.
Displays information for all configured RNCs.
Displays information for a specific RNC.
The Mobile Country Code (MCC) of the RNC. Must be a 3 digit integer from 200 through
999.
The Mobile Network Code (MNC) of the RNC. Must be a 2 or 3 digit integer from 00
through 999.
The identification number of the RNC configuration instance. Must be an integer from 0 to 4095.
Usage
Use this command to display information for a specific Iu-PS service or for all Iu-PS services configured
within the context. It is also possible, but not required, to fine-tune the display to only provide information for
a specific RNC.
Iu-PS services control the interface between the SGSN and the RNCs in the UMTS Radio Access Network
(UTRAN). Iu-PS services include the control plane and the data plane between these nodes.
within the context. It is also possible, but not required, to fine-tune the display to only provide information for
a specific RNC.
Iu-PS services control the interface between the SGSN and the RNCs in the UMTS Radio Access Network
(UTRAN). Iu-PS services include the control plane and the data plane between these nodes.
Example
The following command displays information for a single Iu-PS service named iups-svc-1:
The following command displays information for a single Iu-PS service named iups-svc-1: