Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Global Configuration Mode Commands
▀ boot interface
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
boot interface
Configures the Switch Processor I/O card network interfaces for obtaining a system software image during the system
boot process.
boot process.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the boot interface configuration from the boot.sys file. Only files from the local file system can be
loaded.
loaded.
Specifies the network interface to be configured where
is the primary interface on the SPIO
(slot 24 interface 1 or slot 25 interface 1) and
is the secondary interface on the SPIO (slot 24
interface 2 or slot 25 interface 2). The interfaces refer to either the RJ-45 interfaces for speeds of 10, 100, or
1000 megabit per second (Mbps) or the SFP interface for the optical gigabit (1000 Mbps) interface.
1000 megabit per second (Mbps) or the SFP interface for the optical gigabit (1000 Mbps) interface.
Default: auto
: configures the interface to auto-negotiate the interface speed. and duplex.
: specifies the speed to use at all times where
must be one of:
10
100
1000
The keyword
is used to set the communication mode of the interface where
must be one of:
full
half
Default: rj45
Optionally sets the physical interface where
Optionally sets the physical interface where
must be either rj45 or sfp.
Usage