Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Global Configuration Mode Commands
▀ ran-peer-map
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ran-peer-map
Creates a RAN Peer Map and enters the RAN Peer Map Configuration Mode.
Product
ASN GW, PHS
Privilege
Administrator
Syntax
Removes the RAN Peer Map from the system.
Specifies the name of the RAN Peer Map.
must be from 1 to 31 alpha and/or numeric characters.
Usage
Use this command to create a new RAN Peer Map or edit an existing one. RAN peer maps reconcile base
station MAC addresses received in R6 protocol messages to the base station‘s IP address.
Entering this command results in the following prompt:
[context_name]hostname(config-ran-peer-map)#
RAN Peer Map Configuration Mode commands are defined in the ASN RAN Peer Map Configuration Mode
Commands chapter in this guide.
station MAC addresses received in R6 protocol messages to the base station‘s IP address.
Entering this command results in the following prompt:
[context_name]hostname(config-ran-peer-map)#
RAN Peer Map Configuration Mode commands are defined in the ASN RAN Peer Map Configuration Mode
Commands chapter in this guide.
Example
The following command creates a RAN peer map named
The following command creates a RAN peer map named
: