Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
GPRS Service Configuration Mode Commands
▀ gmm
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
gmm
This command defines the GPRS mobility management parameters for the SGSN service.
Important:
The
command can be repeated to set each timer as needed.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the specified timer timeout to the system default.
Removes the specified GMM definition from the configuration.
Default: new-tlli
This keyword enables the use of either a new TLLI (temporary logical link identifier) or an old TLLI for
attach-accept or RAU-accept messages sent by the SGSN to the MS during related procedures.
This keyword enables the use of either a new TLLI (temporary logical link identifier) or an old TLLI for
attach-accept or RAU-accept messages sent by the SGSN to the MS during related procedures.
Default: 58 minutes
Timer value for the mobile reachability timer.
Timer value for the mobile reachability timer.
must be an integer from 4 to 1440.
Set the number of seconds for the T3314-timeout ready timer value.
must be an integer from 0 to 11160. Default is 44 seconds.
If the MS does not send the ready timer in the Attach/RAU request, then the SGSN sends this T3314-
timeout (ready timer) value.