Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
HA Service Configuration Mode Commands
revocation ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
revocation
Enables the MIP revocation feature and configures revocation parameters.
Product
HA
Privilege
Security Administrator, Administrator
Syntax
{
|
|
|
|
{
|
}
}
{
|
|
{
|
} }
Completely disables registration revocation on the HA, disables trigger handoff, or disables revocation on
idle timer expiration.
idle timer expiration.
Enables the MIP registration revocation feature on the HA. When enabled, if revocation is negotiated with an
FA and a MIP binding is terminated, the HA can send a Revocation message to the FA. This feature is
disabled by default.
FA and a MIP binding is terminated, the HA can send a Revocation message to the FA. This feature is
disabled by default.
Default: 3
The maximum number of retransmissions of a Revocation message before the revocation fails.
The maximum number of retransmissions of a Revocation message before the revocation fails.
must
be an integer from 0 through 10.
Default: disabled
Enables the HA to negotiate the i-bit via PRQ/RRP messages and processes the i-bit revocation messages.
Enables the HA to negotiate the i-bit via PRQ/RRP messages and processes the i-bit revocation messages.
Default: 3
The number of seconds to wait for a Revocation Acknowledgement from the FA before retransmitting the
Revocation message.
The number of seconds to wait for a Revocation Acknowledgement from the FA before retransmitting the
Revocation message.
must be an integer from 1 through 10.
Default: off
Enables sending the NAI extension in the revocation message.
Enables sending the NAI extension in the revocation message.
: Default: Enabled