Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
IuPS Service Configuration Mode Commands
▀ access-protocol
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
access-protocol
This command configures the access protocol parameters for the IuPS service.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured access protocol value.
Specifies the Signaling Connection Control Part (SCCP) for this IuPS service to use.
must be an integer from 1 to 16.
Usage
Use this command to configure access protocol parameters for the current IuPS service.
Example
The following command specifies that the current Iu-PS service should use SCCP 1:
The following command specifies that the current Iu-PS service should use SCCP 1: