Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
MAG Service Configuration Mode Commands
▀ retransmission-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
retransmission-timeout
Configures the maximum allowable time for the MAG service to wait for a response from the LMA before it attempts to
communicate with the LMA again (if the system is configured to retry the LMA) or marks the LMA as unreachable.
communicate with the LMA again (if the system is configured to retry the LMA) or marks the LMA as unreachable.
Product
HSGW, S-GW
Privilege
Administrator
Syntax
Resets the timeout setting to the default value of 3.
Deletes a previously configured timeout value.
Default: 3 seconds (300)
Specifies the maximum allowable time, in milliseconds, for the MAG service to wait for a response from the
LMA before it: a) attempts to communicate with the LMA again (if the system is configured to retry the
LMA) or b) marks the LMA as unreachable.
Specifies the maximum allowable time, in milliseconds, for the MAG service to wait for a response from the
LMA before it: a) attempts to communicate with the LMA again (if the system is configured to retry the
LMA) or b) marks the LMA as unreachable.
must be an integer value between 100 and 100000.
Usage
Use the retransmission timeout command in conjunction with the
command in
order to configure the MAG services behavior when it does not receive a response from a particular LMA.
Example
The following command configures a retransmission timeout value of 5 seconds:
The following command configures a retransmission timeout value of 5 seconds: