Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
PDSN Service Configuration Mode Commands
ppp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ppp
Sets PPP tunneling parameters for subscribers in the current PDSN service.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Clears the configured tunnel context entry.
The name of the context that has a LAC service configured to handle all tunnels from this PDSN service.
: Force all subscriber sessions in this PDSN service to use L2TP tunneling.
: Force all subscriber sessions in this PDSN service to use L2TP tunneling and use IPSEC to
ensure a secure connection.
: Do not force L2TP tunneling. This is the default.
Important:
If the context specified by the
command does not have
a LAC service configured and
is set to
or
, the call is rejected.
Important:
If the PPP tunnel context has not been set or has been cleared with the
command and
is set to
or
, the context where the current PDSN
service resides is used. If that context does not have a LAC service configured the call is rejected.
Usage
Use this command to enable or disable forced L2TP tunneling for all subscribers using this PDSN service.
Also use this command to define which context defines the L2TP tunneling parameters.
Also use this command to define which context defines the L2TP tunneling parameters.
Example
To set the tunnel context to the context named
To set the tunnel context to the context named
and enable forced L2TP tunneling, use the following
commands;
To enable forced L2TP tunneling with IPSEC security, use the following commands;