Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
SS7 Routing Domain Configuration Mode Commands
peer-server ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
peer-server
This command creates a peer-server instance to setup a SIGTRAN peer for sending and receiving M3UA traffic.
Completing the command automatically enters the peer- server configuration mode. To define 1 or more (up to 145)
peer servers, use the commands documented in the Peer-Server Configuration Mode chapter in this reference.
Completing the command automatically enters the peer- server configuration mode. To define 1 or more (up to 145)
peer servers, use the commands documented in the Peer-Server Configuration Mode chapter in this reference.
Product
SGSN, HNB-GW
Privilege
Security Administrator, Administrator
Syntax
Removes the identified peer-server definition from the system configuration.
uniquely identifies a peer-server. The id must be an integer from 1 to 49.
Usage
Use the following command to create a definition for peer-server 2 and enter the configuration mode to
configure the communication parameters for peer-server 12.
configure the communication parameters for peer-server 12.
Example