Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Subscriber Configuration Mode Commands
secondary ip pool ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
secondary ip pool
This command specifies a secondary IP pool to be used as backup pool for NAT.
Important:
This command is license dependent, requiring the 600-00-7871 NAT Bypass license. Please contact
your local sales representative for more information.
Product
NAT
Privilege
Security Administrator, Administrator
Syntax
Removes the previous secondary IP pool configuration.
Specifies the secondary IP pool name.
must be an alpha and/or numeric string of 1 through 31 characters in length.
Usage
Use this command to configure a secondary IP pool for NAT subscribers, which is not overwritten by the
RADIUS supplied list. The secondary pool configured will be appended to the RADIUS supplied IP pool list
/ subscriber template provided IP pool list whichever is applicable during call setup.
RADIUS supplied list. The secondary pool configured will be appended to the RADIUS supplied IP pool list
/ subscriber template provided IP pool list whichever is applicable during call setup.
Example
The following command configures a secondary IP pool named
The following command configures a secondary IP pool named
: