Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
ASN Gateway Service Configuration Mode Commands
▀ max-retransmission
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
max-retransmission
This command the maximum number of times that the system attempts retransmission of R6 control packets to
communicate with unresponsive BS.
communicate with unresponsive BS.
Product
ASN GW
Privilege
Administrator
Syntax
Sets the maximum number of retransmission counter to 3 for R6 control packets within specific ASN GW
service.
service.
Default: 3
Configures the maximum number of retransmission of R6 control packets to BS before marking it as
dead/failed.
Configures the maximum number of retransmission of R6 control packets to BS before marking it as
dead/failed.
must be an integer between 1 and 10.
Usage
Use this command to configure number of retransmission of R6 control packets to BS before marking it as
fail/dead.
fail/dead.
Example
The following command configures the system to attempt times to send R6 control packets to BS:
The following command configures the system to attempt times to send R6 control packets to BS: