Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Charging Action Configuration Mode Commands
flow idle-timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
flow idle-timeout
This command configures the maximum duration a flow can remain idle after which the system automatically
terminates the flow.
terminates the flow.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables the idle-timeout configuration; sets the idle-timeout to 0 seconds.
Configures the default setting.
Default: 300 seconds
Default: 300 seconds
Specifies the maximum duration, in seconds, a flow can remain idle.
must be an integer from 0 through 86400.
Usage
Use this command to configure the maximum duration a flow can remain idle after which the system
automatically terminates the flow.
automatically terminates the flow.
Example
The following command configures the idle-timeout setting to
The following command configures the idle-timeout setting to
seconds: