Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Content Filtering Policy Configuration Mode Commands
▀ failure-action
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
failure-action
This command specifies the failure action when the content filtering analysis results are not available to analyze.
Product
CF
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
In static content filtering, this option allows the request for content, and in dynamic content filtering allows
the content itself.
the content itself.
Important:
Static-and-Dynamic Content Filtering is only supported in StarOS 9.0 and later.
Specifies the content string to be inserted in place of the message returned from the content server due to
connection timeout or when no category policy ID is available for the content.
In case of static content filtering, the
connection timeout or when no category policy ID is available for the content.
In case of static content filtering, the
is used to create a response to the subscriber‘s
attempt to get content, and in dynamic content filtering it replaces the content returned by a server.
must be an alpha and/or numeric string of 1 through 1023 characters in length.
Important:
Static-and-Dynamic Content Filtering is only supported in StarOS 9.0 and later.
In static content filtering, specifies discarding the packet(s) that requested, and in dynamic content filtering
discards the packet(s) that contain the content.
discards the packet(s) that contain the content.
Important:
Static-and-Dynamic Content Filtering is only supported in StarOS 9.0 and later.
Redirects the subscriber to the specified URL.
must be a string of 1 through 1023 characters in length, and must be in the following format: