Cisco Cisco Packet Data Interworking Function (PDIF) Guida Alla Risoluzione Dei Problemi
APN Configuration Mode Commands
▀ authentication
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
authentication
Configures the APN‘s authentication parameters.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Sets the default authentication type for this APN. By default
is the type for authentication
for an APN.
Obsolete. Use
.
Default: Disabled.
Configures the APN to attempt to authenticate the subscriber based on their International Mobile Subscriber
Identification (IMSI) number.
Configures the APN to attempt to authenticate the subscriber based on their International Mobile Subscriber
Identification (IMSI) number.
Default: Disabled.
Configures the APN to attempt to authenticate the subscriber based on their Mobile Station International
Integrated Services Digital Network (MSISDN) number as described in table in Usage section of this
command.
Configures the APN to attempt to authenticate the subscriber based on their Mobile Station International
Integrated Services Digital Network (MSISDN) number as described in table in Usage section of this
command.
Default: Disabled.
This keyword if enabled , eaither with
or
strips the APN name from the user name
@
or
@
received from AAA and make the user name as
or
respectively.
Default: Disabled.
This keyword, if enabled, uses the password received through Protocol Configuration Options (PCO) from AAA for
authentication.
authentication.
Default: Enabled
Configures the APN to not perform authentication for PDP contexts as described in table in Usage section.
Configures the APN to not perform authentication for PDP contexts as described in table in Usage section.