Cisco Cisco Tunnel Terminating Gateway (TTG) Guida Alla Risoluzione Dei Problemi
Global Configuration Mode Commands
▀ port channelized
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
port channelized
Identifies a physical port on a channelized line card that supports Frame Relay signaling and creates a Frame Relay
interface. As well, this command enters the configuration mode for the commands to configure the Frame Relay
interface and the channelized port interface, see the CLI chapter Channelized Port Configuration Mode.
interface. As well, this command enters the configuration mode for the commands to configure the Frame Relay
interface and the channelized port interface, see the CLI chapter Channelized Port Configuration Mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Selects the channelized frame relay interface for the selected line card and port.
To determine valid slots and port numbers, use the Exec mode‘s command
to find the
channelized line card
Identifies the chassis slot holding the Channelized line card that supplies Frame Relay ports. The slot
ID number can be any valid integer between 17 and 48.
Identifies the physical port that is to be configured to support Frame Relay signaling. The ID number
can only be 1.
Usage
Change the current configuration mode to Channelized Port configuration mode.
Example
The following enters the Channelized port configuration mode for port 1 on the card in slot 20:
The following enters the Channelized port configuration mode for port 1 on the card in slot 20: