Cisco Cisco Tunnel Terminating Gateway (TTG) Guida Alla Risoluzione Dei Problemi
Rulebase Configuration Mode Commands
qos-renegotiate timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
qos-renegotiate timeout
This command configures the timeout setting for the Quality of Service (QoS) Renegotiation feature.
Important:
This command is controlled by the dynamic-qos-renegotiation license.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables timeout setting if previously configured.
Specifies the timeout period for QoS Renegotiation feature in this rulebase.
must be the timeout period, in seconds, and must be an integer from 0 through 4294967295.
If set to 0, timeout is disabled.
Usage
Use this command to configure timeout setting for the QoS Renegotiation feature.
Example
The following command sets the QoS renegotiate timeout period to 1000 seconds:
The following command sets the QoS renegotiate timeout period to 1000 seconds: