Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
APN Configuration Mode Commands
▀ qos negotiate-limit
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
qos negotiate-limit
This command configure the QoS profile to provide the peak and committed data rate limits that the GGSN assigns to
the APN, and sends to the SGSNs in response to GTP create/update PDP context requests for traffic shaping and
policing functionality.
the APN, and sends to the SGSNs in response to GTP create/update PDP context requests for traffic shaping and
policing functionality.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Disables the QoS Profile for the APN.
Important:
When no Qos Profile is configured, the system‘s default behavior is to use the information provided
by the SGSN.
Apply the specified limits and actions to the downlink ( to-Gn direction).
Apply the specified limits and actions to the uplink (to-Gi direction).
Apply the specified limits and actions to PDP contexts of the specified UMTS traffic class. The following
classes are supported:
classes are supported:
Specifies the QOS for traffic patterns in which the data transfer is not time-critical
(for example email exchange). This traffic pattern should be the lowest QOS.
Specifies the QOS for traffic patterns in which there is an constant flow of
packets in each direction, upstream and downstream. This traffic pattern should be the highest QOS.
Specifies the QOS for traffic patterns in which there is an
intermittent flow of packets in each direction, upstream and downstream. This traffic pattern should
be a higher QOS than the background pattern, but not as high as that for the streaming pattern.
be a higher QOS than the background pattern, but not as high as that for the streaming pattern.
is the 3GPP traffic handling priority and can be the integers 1,2 or 3.