Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
ASN Gateway Service Configuration Mode Commands
▀ max-retransmission
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
max-retransmission
Use this command to specify the number of times the system can attempt retransmission of R6 control packets to
communicate with an unresponsive BS.
communicate with an unresponsive BS.
Product
ASN GW
Privilege
Administrator
Syntax
Sets the maximum number of retransmission counters to 3 for R6 control packets within a specific ASN GW
service.
service.
Default: 3
Configures the maximum number of retransmission of R6 control packets to BS before marking it as failed.
Configures the maximum number of retransmission of R6 control packets to BS before marking it as failed.
must be an integer between 1 and 10.
Usage
Use this command to configure number of retransmission of R6 control packets to BS before marking it as
failed.
failed.
Example
The following command configures the system to attempt sending R6 control packets to the BS times:
The following command configures the system to attempt sending R6 control packets to the BS times: