Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
ASN Paging Group Configuration Mode Commands
▀ paging
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
paging
Use to configure the paging parameters within the paging group for PC-LR functionality.
Product
ASN PC-LR
Privilege
Administrator
Syntax
Disables the configured paging parameters within this paging group.
Specifies the cycle in which the paging message is transmitted within the paging group.
Enter an integer for
Enter an integer for
from 0 through 65535.
Specifies the maximum duration in frames of Paging Listening Interval; used in calculation of Paging
Listening Interval.
Listening Interval.
must be an integer from 1 through 5.
id
: Configures the MAC address of the node in the paging group.
must be in one of the following formats:
nn:nn:nn:nn:nn:nn or nn-nn-nn-nn-nn-nn
: Specifies the IP address of the node. Express
in IPv4 or IPv6
dotted decimal notation.
Important:
Configure up to 128 paging nodes per paging group.
: Specifies the starting value of the available offset.
For
, enter an integer from 0 through 65535.
: Specifies the distance between two offsets.
For
, enter an integer from 0 through 65535.
: Specifies the number of offsets available.
For
, enter an integer from 0 through 65535.
Offsets are uniformly load balanced across the available range. For this configuration: