Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
ATM Port Configuration Mode Commands
▀ pvc
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
pvc
This command creates a Permanent Virtual Connection (PVC), including the definition of the associated Virtual Path
Identifiers (VPI) and Virtual Connection Identifiers (VCI) for the PVC. By defining a PVC, this command enters into
PVC configuration mode. The ATM port supports a maximum of 256 PVC definitions.
Identifiers (VPI) and Virtual Connection Identifiers (VCI) for the PVC. By defining a PVC, this command enters into
PVC configuration mode. The ATM port supports a maximum of 256 PVC definitions.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the PVC‘s entry from the configuration.
VPI identifies a unique path to a destination point in the ATM portion of the network. The VPI and the VCI
combine to create the PVC between the MS and the destination point.
combine to create the PVC between the MS and the destination point.
must be an integer, 0 to 255.
VCI identifies a unique virtual circuit within the associated VPI.
must be an integer, 0 to 65535.
Usage
Creates a virtual circuit between two specific points that the carrier will use repeatedly.
Example
Define a PVC with VPI 2 and VCI 353.
Define a PVC with VPI 2 and VCI 353.