Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
BITS Port Configuration Mode Commands
▀ default
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
default
Restores the port‘s default speed and communication mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Default: none
Sets the default for the ports framing mode.
Sets the default for the ports framing mode.
Default: non-revertive
Sets the port for non-revertive operation for port redundancy auto-recovery; requiring an administrative user
to manually issue a port switch command to return service to the original port.
Sets the port for non-revertive operation for port redundancy auto-recovery; requiring an administrative user
to manually issue a port switch command to return service to the original port.
Usage
Restores port-level parameters to their default values.
Example
Use the following command to remove any setting for this port‘s framing mode:
Use the following command to remove any setting for this port‘s framing mode: