Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Diameter Endpoint Configuration Mode Commands
watchdog-timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
watchdog-timeout
This command configures the Watchdog Timeout parameter.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables the watchdog timeout configuration.
Configures the default watchdog timeout setting.
Specifies the timeout duration, in seconds, and must be an integer from 6 through 30.
Default: 30 seconds
Default: 30 seconds
Usage
Use this command to configure the Watchdog Timeout parameter for the Diameter endpoint. If this timer
expires before getting a response from the destination, other route to the same destination is tried, as long as
the retry count setting has not been exceeded (see the
expires before getting a response from the destination, other route to the same destination is tried, as long as
the retry count setting has not been exceeded (see the
Example
The following command sets the watchdog timeout setting to
The following command sets the watchdog timeout setting to
seconds: