Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
eGTP Service Configuration Mode Commands
gtpc ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
gtpc
Configure the GPRS Tunneling Protocol Control (GTP-C) plane settings for this service.
Product
MME, P-GW, S-GW
Privilege
Administrator
Syntax
Disables or removes the configured GTP-C setting.
Resets the specified parameter to its default value.
Binds the service to an interface with an IPv4 address, IPv6 address or both.
: Binds this service to the
IPv4 address of a configured interface. Optionally, bind the service to a configured interface with an IPv6
address.
address.
must be entered as a standard IPv4 address in dotted decimal notation.
must be entered as a standard IPv6 address in colon-separated notation.
: Binds this service to the
IPv6 address of a configured interface. Optionally, bind the service to a configured interface with an IPv4
address.
address.
must be entered as a standard IPv6 address in colon-separated notation.
must be entered as a standard IPv4 address in dotted decimal notation.
Default: 60
Configures the duration between the sending of echo messages.
Configures the duration between the sending of echo messages.
must be an integer value from 60
to 3600.
Default: