Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi

Exec Mode Commands (A-C)

card psc upgrade ▀

Cisco ASR 5000 Series Command Line Interface Reference ▄

OL-22947-02

card psc upgrade

This command upgrades the programmables on the PSC card.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Upgrades programmables on the specified card. Must be followed by a slot number of card to upgrade.

Caution:

This command should only be used if instructed by or working with Technical Support.

Usage

You can only initiate an upgrade if:

there is no migration occurring

the card is active or standby

there is no online upgrade in progress

Important:

The following operations are not allowed while a card is upgrading: change pac edc requirement

(config) change card [no] shutdown (config) change card active (config) change card redundancy (config) card halt
(exec) card reboot (exec) start an online upgrade

Important:

Level unlock operations are ignored while a card is upgrading.

Important:

This command is not supported on all platforms.

Example
The following command initiates a PSC upgrade on slot number