Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Commands (A-C)
▀ clear active-charging fw-and-nat policy statistics
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
clear active-charging fw-and-nat policy statistics
This command clears statistics for all or a specific firewall-and-NAT policy.
Product
FW, NAT
Privilege
Security Administrator, Administrator, Operator
Syntax
Displays information for all firewall-and-NAT policies configured.
Displays information for the specified firewall-and-NAT policy.
must be the name of a firewall-and-NAT policy, and must be an alpha and/or numeric string
of 1 through 63 characters in length.
Specifies that output of this command is to be piped (sent) to the command specified. A command to send the
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to clear statistics for all or a specific firewall-and-NAT policy.
Example
The following command clears statistics for the firewall-and-NAT policy named
The following command clears statistics for the firewall-and-NAT policy named
: