Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Commands (D-S)
▀ dhcp test
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
dhcp test
Tests DHCP functions for a particular DHCP service.
Product
GGSN, ASN-GW
Privilege
Security Administrator, Administrator, Operator
Syntax
The name of the DHCP service. It can be from 1 to 63 alpha and/or numeric characters in length and is case
sensitive.
sensitive.
Tests DHCP functionality for all servers.
Tests DHCP functionality for the server.
is the IP address of the DHCP server in dotted-decimal notation.
Usage
Once DHCP functionality is configured on the system, this command can be used to verify that it is
configured properly and that it can successfully communicate with the DHCP server.
Executing this command causes the system to request and allocate an IP address and then release it.
If a specific DHCP server is not specified, then each server configured in the service is tested.
configured properly and that it can successfully communicate with the DHCP server.
Executing this command causes the system to request and allocate an IP address and then release it.
If a specific DHCP server is not specified, then each server configured in the service is tested.
Example
The following command tests the systems ability to get an IP address from all servers a DHCP service called DHCP-Gi
is configured to communicate with:
The following command tests the systems ability to get an IP address from all servers a DHCP service called DHCP-Gi
is configured to communicate with: