Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Commands (D-S)
▀ gtpp test
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
gtpp test
Tests the system‘s ability to communicate with configured CGF(s).
Product
GGSN
Privilege
Operator, Config-Administrator, Administrator
Syntax
Tests all CGFs configured within the given context.
Tests a specific CGF configured within the given context.
is the IP address of the CGF expressed in dotted decimal notation.
Test the connectivity and provide round trip time for the echo request sent to GTPP Storage-Server
configured in the requested context.
configured in the requested context.
is the IP address of the GSS expressed in dotted decimal notation and
is the port
defined for GTPP Storage Server.
Usage
This command is used to verify the configuration of and test the system‘s ability to communicate with one or
all configured GSS/CGFs for monitoring or troubleshooting purposes.
When executed, this command causes the system to send GTPP echo packets to the specified GSS/CGF(s).
The command‘s response will display whether the GSS/CGF is active or unreachable.
all configured GSS/CGFs for monitoring or troubleshooting purposes.
When executed, this command causes the system to send GTPP echo packets to the specified GSS/CGF(s).
The command‘s response will display whether the GSS/CGF is active or unreachable.
Example
The following command tests communication with a CGF having an IP address of 192.168.1.5:
The following command tests communication with a CGF having an IP address of 192.168.1.5:
The following command tests communication with a GSS configured in requested context
The following command verify communication with a GSS, having IP address
and port
,
without configuring it in a context