Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Commands (D-S)
▀ ppp echo-test
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ppp echo-test
Verifies the point-to-point link by sending link control protocol packets to the targeted users. This command will not
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator, Operator
Syntax
Specifies the exact call instance ID which is to have its PPP link verified.
is specified as a 4-byte
hexadecimal number.
Specifies the International Mobile Subscriber Identifier (IMSI) which is to have its PPP link verified.
Specifies the IP address which is to have its PPP link verified.
must be specified using the
standard IPv4 dotted decimal notation.
Specifies the mobile subscriber ID which is to have its PPP link verified.
must be from 7 to 16 digits
specified as an MIN, or RMI.
Specifies a user which is to have its PPP link verified.
must refer to a previously configured
user.
Default 1
Specifies the number of test packets to generate.
Specifies the number of test packets to generate.
must be a value in the range from 1 through
1000000.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in Command Line Interface Reference.
Usage