Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Commands (D-S)
sgsn op ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Enter an integer from 0 to 65535.
Enter an integer from 0 to 65535.
- SGSN initiates NS-Reset for all NSVC configured in the NSE.
Enter an integer from 0 to 65535.
- SGSN initiates NS-Unblock for all NSVC configured for the specified
NSE.
Enter an integer from 0 to 65535.
:
Important:
Thiscommand can be used for troubleshooting/debugging purposes and is
primarily intended for the use of specially trained service representatives.
Instructs the SGSN (1) to send the BSSGP message SGSN-INVOKE-TRACE to the BSC to initiate a BSC
trace of a particular MS and (2) to define the type and triggering of the trace.
trace of a particular MS and (2) to define the type and triggering of the trace.
Identify the peer NSE, enter an integer from 0 to 65535.
Select the type of trace to be performed:
Enter the trace reference ID - an integer from 0 to 65535.
Select the appropriate mobile ID type for the MS that is to be
traced:
- Specifies the mobile ID type as the unique International Mobile
Equipment Identity.
Enter the 15-digit IMEI value.
- Specifies the mobile ID type as the unique International Mobile
Equipment Identity - with the two-digit software version number.
Enter the 16-digit IMEISV value.
- Specifies the mobile ID type as a network unique International
Mobile Subscriber Identity.
Enter the 15-digit IMSI value.
Enter the trace transaction ID - an integer from 0 to
65535.
SGSN displays the configured PLMN list for the specified session manager (SessMgr):
Enter up to 4 digits, 0 to 4095.
The
commands assist with troubleshooting connections between the SGSN and the peer server.