Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Modes Show Commands (H-L)
show logs ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
radius-coa: RADIUS change of authorization and radius disconnect
rct: Recovery Control Task logging facility
rdt: Redirect Task logging facility
resmgr: Resource Manager logging facility
rip: RIP logging facility (RIP is not supported at this time.)
rohc: RObust Header Compression facility
rsvp: Reservation Protocol logging facility
sct: Shared Configuration Task logging facility
sessctrl: Session Controller logging facility
sessmgr: Session Manager logging facility
sft: Switch Fabric Task logging facility
sgw: Serving Gateway logging facility
sipcdprt: Sip Call Distributor facility
sitmain: System Initialization Task main logging facility
snmp: SNMP logging facility
srdb: Static Rating Database
srp: Service Redundancy Protocol (SRP) logging facility
ssh-ipsec: SSH IP Security logging facility stat: Statistics logging facility
stat: Statistics logging facility
system: System logging facility
tacacsplus: TACACS+ Protocol logging facility
threshold: threshold logging facility
udr: User detail record facility (used with the Charging Service)
user-data: User data logging facility
user-l3tunnel: User layer-3 tunnel logging facility
vpn: Virtual Private Network logging facility
wimax-data: WiMAX DATA
wimax-r6: WiMAX R6
: specifies the level of information to be logged,
, from the
following list which is ordered from highest to lowest:
critical - display critical events
error - display error events and all events with a higher severity level
warning - display warning events and all events with a higher severity level
unusual - display unusual events and all events with a higher severity level
info - display info events and all events with a higher severity level
trace - display trace events and all events with a higher severity level