Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Exec Mode Show Commands (Q-S)
show sgtpu statistics ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
show sgtpu statistics
This command displays all transmission and reception statistics, for pre-defined and active GTP-U interfaces, collected
since the last restart or last use of a clear command.
since the last restart or last use of a clear command.
Product
SGSN
PDG/TTG
Privilege
Security Administrator, Administrator, Inspector, Operator
Syntax
Displays statistics for a specific GGSN identified by the GGSN‘s IPv4 address. specified
in dotted decimal notation.
Displays statistics for the specified IuPS service in the current context.
must be the name of a previously configured and active IuPS service and must be an
alphanumeric string from 1 to 63 characters in length.
Displays statistics for a specific RNC identified by the RNC‘s IPv4 address. specified in
dotted decimal notation.
Displays statistics for the specified SGTP service in the current context.
must be the name of a previously configured and active SGTP service and must be an
alphanumeric string from 1 to 63 characters in length.
Displays the statistics for a specific NSEI-based GTPU statistics associated with the specified GPRS service
in the current context.
in the current context.
must be the name of a previously configured and active GPRS service and must be an
alphanumeric string from 1 to 63 characters in length.
must be an integer from 0 to 65535.
Usage
Use this command to display information for SGSN services.