Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
Firewall-and-NAT Policy Configuration Mode Commands
nat suppress-aaa-update ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
nat suppress-aaa-update
This command suppresses sending NAT Bind Update (NBU) to the AAA server when PPP disconnect happens.
Important:
This command is customer-specific. For more information please contact your local service
representative.
Product
NAT
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: No suppression of AAA updates.
Default: No suppression of AAA updates.
Usage
Use this command to suppress sending of NBU to the AAA server when PPP disconnect happens, as these
NBUs would be cleared at the AAA after receiving the accounting-stop. This enables to minimize the number
of messages between the chassis and AAA server. When not configured, NBU are sent to the AAA server
whenever a port chunk is allocated, de-allocated, or the call is cleared (PPP disconnect).
NBUs would be cleared at the AAA after receiving the accounting-stop. This enables to minimize the number
of messages between the chassis and AAA server. When not configured, NBU are sent to the AAA server
whenever a port chunk is allocated, de-allocated, or the call is cleared (PPP disconnect).
Example
The following command suppresses the sending of NBU to the AAA server:
The following command suppresses the sending of NBU to the AAA server: