Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
GGSN Service Configuration Mode Commands
gtpc nsapi-in-create-pdp-response ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
gtpc nsapi-in-create-pdp-response
This command configures the exclusion/inclusion of optional information element (IE) Network Service Access Point
Identifier (NSAPI) in ―Create PDP Context Response‖ messages in GTP-C.
Identifier (NSAPI) in ―Create PDP Context Response‖ messages in GTP-C.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Sets the default mode for GTP-C messages; i.e. to not to include NSAPI IE in ―Create PDP Context
Response‖ messages.
Response‖ messages.
Removes the preconfigured mode for GTP-C messages; in other words sets the mode for GTP-C message to
not to include NSAPI IE in ―Create PDP Context Response‖ messages. By default it is disabled.
not to include NSAPI IE in ―Create PDP Context Response‖ messages. By default it is disabled.
Usage
Use this command to configure the mode for the GTP-C messages to exclude or include the NSAPI IE in
―Create PDP Context Response‖ message received from SGSN.
―Create PDP Context Response‖ message received from SGSN.
Example
The following command configures the GGSN service to include the optional IE of NSAPI in ―Create PDP Context
Response‖ message:
The following command configures the GGSN service to include the optional IE of NSAPI in ―Create PDP Context
Response‖ message: