Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
ACS Configuration Mode Commands
buffering-limit ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
buffering-limit
This command configures the flow- or session-based packet buffering setting.
Product
ACS
Privilege
Security Administrator, Administrator
Syntax
Configures the default buffering-limit setting.
Default: no limit, other than the maximum amount of available memory
Default: no limit, other than the maximum amount of available memory
Disables the buffering limit configuration.
Specifies the maximum number of packets that can be buffered per flow.
must be an integer from 1 through 255.
Specifies the maximum number of packets that can be buffered per subscriber.
must be an integer from 1 through 255.
Usage
Use this command to configure the limits for buffering packets sent by a subscriber, while it is waiting for a
response from the Diameter server. Packets need to be buffered for various reasons, such as, waiting for
Credit Control Authorization or waiting for the result of a content filtering rating request.
response from the Diameter server. Packets need to be buffered for various reasons, such as, waiting for
Credit Control Authorization or waiting for the result of a content filtering rating request.
Example
The following command sets the buffering limit per flow to
The following command sets the buffering limit per flow to
: