Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
ACS Configuration Mode Commands
▀ firewall flow-recovery
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
firewall flow-recovery
This command configures Stateful Firewall Flow Recovery feature.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default flow-recovery setting.
Default: Downlink and uplink flow recovery enabled, 300 seconds
Default: Downlink and uplink flow recovery enabled, 300 seconds
Disables the flow recovery configuration.
Specifies the packets:
: Enables flow recovery for packets from downlink direction.
: Enables flow recovery for packets from uplink direction.
Specifies the Stateful Firewall Flow Recovery Timeout setting, in seconds.
must be an integer from 1 through 86400.
Default: 300 seconds
Usage
Use this command to configure Stateful Firewall Flow Recovery feature.
Important:
NAT flows will not be recovered.
Example
The following command configures Stateful Firewall Flow Recovery for packets in downlink direction with a timeout
setting of
The following command configures Stateful Firewall Flow Recovery for packets in downlink direction with a timeout
setting of
seconds: