Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
HSGW Service Configuration Mode Commands
plmn id ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
plmn id
Configures Public Land Mobile Network identifiers used to determine if a mobile station is visiting, roaming, or belongs
to this network.
to this network.
Product
HSGW
Privilege
Administrator
Syntax
: Specifies the mobile country code (MCC) portion of the PLMN‘s identifier.
is the
PLMN MCC identifier and must be an integer value between 100 and 999.
: Specifies the mobile network code (MNC) portion of the PLMN‘s identifier.
is the
PLMN MNC identifier and can be configured to any 2 or 3 digit integer value between 00 and 999.
Usage
The PLMN identifier is used to aid the HSGW service in the determination of whether or not a mobile station
is visiting, roaming, or home. Multiple P-GW services can be configured with the same PLMN identifier. Up
to five PLMN IDs can be configured for each P-GW Service. The configured IDs are used in Diameter-EAP-
Request messages (as a Visited-Network-Identifier AVP).
is visiting, roaming, or home. Multiple P-GW services can be configured with the same PLMN identifier. Up
to five PLMN IDs can be configured for each P-GW Service. The configured IDs are used in Diameter-EAP-
Request messages (as a Visited-Network-Identifier AVP).
Example
The following command configures the PLMN identifier with an MCC of
The following command configures the PLMN identifier with an MCC of
and MNC of :