Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
IuPS Service Configuration Mode Commands
radio-network-controller ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
radio-network-controller
This command creates an instance of an RNC configuration to associate with the IuPS service for the SGSN. This
command is only available in release 8.0; use the
command is only available in release 8.0; use the
command for releases 8.1 and higher.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configuration information for the specified RNC.
Define the instance number of the RNC configuration.
: Must be an integer from 0 to 4095.
Specifies the mobile country code (MCC).
: Must be an integer between 100 and 999.
Specifies the mobile network code (MNC).
: Must be an integer between 00 and 999.
Usage
Use this command to configure information for the IuPS service to use to contact specific RNCs.
This command also provides access to the RNC configuration mode.
This command also provides access to the RNC configuration mode.
Example
The following command creates or accesses an instance of an RNC configuration.
The following command creates or accesses an instance of an RNC configuration.