Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
MAG Service Configuration Mode Commands
information-element-set ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
information-element-set
Identifies the information element set of mobility options to be used in Proxy Binding Update (PBU) messages sent by
the MAG to the LMA.
the MAG to the LMA.
Product
HSGW, S-GW
Privilege
Administrator
Syntax
Resets the command to the default value of ―standard‖.
: Specifies that a custom set of mobility options to be used in proxy binding update messages that
are sent in Vendor Specific Mobility Options. These options are:
User Location Info
Hardware Identifier
Access Network Charging Identifier
: Specifies that a standard set of mobility options are to be used in proxy binding update
messages. The 3GPP specification, 29.275 defines these as Protocol Configuration Options.
Usage
Use this command to identify the type of information element set of mobility options to be used in PBU
messages sent form the MAG to the LMA. The mobility options can be either standards-based (3GPP 29.275)
or custom (vendor-specific as defined by 3GPP 29.275).
messages sent form the MAG to the LMA. The mobility options can be either standards-based (3GPP 29.275)
or custom (vendor-specific as defined by 3GPP 29.275).
Example
The following command identifies the information element set of mobility options to use in PBU messages as custom:
The following command identifies the information element set of mobility options to use in PBU messages as custom: