Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
MAP Service Configuration Mode Commands
equipment-identity-register ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
equipment-identity-register
Defines the information relevant to the equipment-identity-register (EIR) used by the SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the EIR configuration.
Enter the E.164 number of the EIR.
must be a string of 1 to 15 digits.
Enter SS7 point code address of the EIR in dotted-decimal format according to variant settings:
ITU Range 0.0.1 to 7.255.7
ANSI Range 0.0.1 to 255.255.255
TTC Range 0.0.1 to 15.31.255
or a string of 1 to 11 characters
Identifies the subsystem number (SSN) to be used.
must be an integer from 1 to 255.
Configures the frequency with which a ‗check IMEI‘ message is sent to the EIR. When set, the SGSN skips
sending the ‗check IMEI‘ message for the first N-1 where IMDI/IMEISV is received.
sending the ‗check IMEI‘ message for the first N-1 where IMDI/IMEISV is received.
For releases 8.0 and 8.1, the value must be an integer from 1 to 15.
For releases 9.0 and higher, the value must be an integer from 1 to 255.
Important:
This feature requires the enabling of
for IMEI or IMEISV as
specified with the the
command of the SGSN Operator Policy
configuration mode.