Cisco Cisco Packet Data Gateway (PDG) Guida Alla Risoluzione Dei Problemi
MME Service Configuration Mode Commands
▀ setup-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
setup-timeout
This command configures the timeout duration for call setup of MME calls in this MME service.
Product
MME
Privilege
Security Administrator, Administrator
Syntax
Sets the call setup timeout duration to default value of 60 seconds.
Default: 60
Specifies the call setup timeout duration for MME calls after which attempt will be discarded.
Specifies the call setup timeout duration for MME calls after which attempt will be discarded.
must be an integer between 1 through 10000.
Usage
Use this command to configured the timeout duration in seconds to setup an MME call with an MME service.
One this duration exhausted Call setup procedure will be discarded with this MME service.
One this duration exhausted Call setup procedure will be discarded with this MME service.
Example
The following command sets the default setup timeout duration of 60 seconds for MME calls:
The following command sets the default setup timeout duration of 60 seconds for MME calls: